UPB universal bracket

Suitable for any configuration of cable fastening on wooden, concrete or metal poles.

The UPB bracket is a cast product made of aluminum alloy with high mechanical characteristics. Its special formula has been developed and patented in order to obtain a universal holding block suitable for any configuration of cable fastening on wooden, concrete or metal poles:

  • at the end points of the line;
  • when the route passes at an angle;
  • at branch points;
  • fastening of extensions;
  • fastening of crossbars;
  • connecting consumers (drop cable);
  • for organizing cable unwinding on blocks (rollers).

UPB bracket mounting methods

Strap mounting

The UPB bracket is mounted on all types of posts, with or without holes, using two SB 204 / SB 207 20 mm wide straps and two B20 locks or two sleeves (A20). On average, two straps of one meter long are required per bracket. The choice of strap thickness depends on the required strength, which in turn is determined by the tensile force applied to the bracket.

Bolt mounting

If there is a hole in the top of the post (wooden, and sometimes concrete), the UPB bracket can be mounted using a 14 or 16 mm diameter bolt that goes through it. In this case, the bolt length is determined as the diameter of the post top + 42 mm (bracket thickness).

Specifications

Design material

Aluminum alloy

Type of construction

Universal

Have any questions? Contact us

CONTACT US