On-floor telecommunication cabinet

SN-IRON series disassemblable floor-mounted telecommunication cabinets are designed to accommodate active and passive telecommunication equipment, as well as to protect against unauthorized access to the cabinet equipment.


The main advantages of this cabinet are the strength and reliability of the structure, easy access to the equipment installed inside, as well as space-saving packaging (flatpack).


The cabinet structure consists of a front and a rear frames, top, bottom, side panels, front door, rear panel/door, mounting profiles and unit racks.

The frame is made of sheet steel 2 mm thick, allowing to withstand the maximum permissible distributed load of up to 800 kg.

The assembly does not require special knowledge, skills or special tools. The cabinet can be assembled using only a cross-point screwdriver.


The SN-IRON series of on-floor cabinets includes the cabinets of 18 to 47 units high. The cabinet width is 600 mm and 800 mm. The depth of the cabinets of this line is 600/800/1,000/1,100/1,200 mm.


The front/rear door is fixed with a tilt-and-turn lock with a handle and can be provided in such versions:

– with tempered glass 4 mm thick

– perforated

– blind


The door opening angle is over 180°. The door can be installed both on the left and on the right side of the cabinet.

Instead of the back door, a solid panel can be installed, which is fixed by a twist and clamping lock.


The standard delivery package includes 4 galvanized unit racks, which provide reliable fastening of equipment inside the cabinet. The racks installation depth can be adjusted in increments of 25mm. Due to the zinc coating, the unit racks are durable and also are the grounding element of the cabinet.

Each unit rack is attached to three transverse guide rails, which additionally strengthen the structure of the cabinet as a whole and provide reliable mounting of unit racks.


The removable side panels are equipped with twist and clamping locks for a secure fit. The cabinets with a depth of 1,000 mm and more have two removable side panels on each side, which provides easier assembly/disassembly, as well as convenient access to the equipment installed inside the cabinet.

The cabinet is mounted on height-adjustable cast supports.


A special outdoor powder and polymer paint is used to coat the cabinets, creating a durable hard-alloy coating resistant to external effects, including mechanical ones. Two standard colours are available: RAL7035 (gray) and RAL9005 (black).


The design of the cabinet includes:

– passive ventilation on the sides, at the top and at the bottom of the cabinet;

– the ability to install a fan on the roof;

– the front of the cabinet does not have sharp corners, which reduces the chance of personal injury;

– access to equipment from 4 sides: the front, back and two lateral sides of the cabinet;

– welded copper-plated screws with a grounding set;

– cable entry is through the holes at the top and at the bottom of the cabinet.

SN-IRON cabinets can be equipped with a wide range of accessories: horizontal and vertical organizers, console/slide-out/reinforced shelves, EDP (electric distributing panel), a fan unit…


Interested in telecommunication equipment? Write to us! We will contact you shortly.